100% Original Factory Plastic Molded Case - Plastic Injection Molding For Small Appliances And Electrical Products – Zetar
100% Original Factory Plastic Molded Case - Plastic Injection Molding For Small Appliances And Electrical Products – Zetar Detail:
Mold Description: 1-Start from part design analysis 2-Mold design drawing and DFM report available so you can see how is the mold going to be before mold making
3-If product is complex,moldflow report will be present as well
4-In house mold making shop ensure you mold quality under well control.
5-Normally it takes 20-40 days to make mold,precise time depends on part design
Company Information: Zetar Industry Co.,Limited from Shanghai China. Our company has In-house tooling shop- fully equipped 6000 square feet tool room,making sure your molds making in house,providing free mold routine maintenance,and also mold repair work if you need. Meanwhile 90 ton – 1100 ton injection molding machines 20 sets,30000 square feet injection molding room including 250 square feet M7 class clean room.We can produce parts from 0.01pound to 13 pounds. If you have any plastic related product need to make,please feel free to email me email@example.com www.zetarmold.com
1. Are you a trading company or a manufacturer？ We are a manufacturer as you can see our workshop as above.
Product detail pictures:
Related Product Guide:
From Start to Finish: This Is How a Custom Engagement Ring Is Made | Molds For Injection Molding
Intricon Corporation (NASDAQ:IIN) Has Increase in Shorts | Molds For Injection Molding
Sticking for the perception of "Creating goods of high quality and making good friends with people today from all around the world", we constantly set the interest of shoppers to begin with for 100% Original Factory Plastic Molded Case - Plastic Injection Molding For Small Appliances And Electrical Products – Zetar, The product will supply to all over the world, such as: Greece , British , Libya , we have all day online sales to make sure the pre-sale and after-sale service in time. With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.
By Ida from Lyon - 2016.08.21 14:13
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By Judy from Sri Lanka - 2015.11.06 10:04