China Cheap price Plastic Injection Molds For Food Containers - ISO Qualified Plastic Injection Molding Products/Making – Zetar
China Cheap price Plastic Injection Molds For Food Containers - ISO Qualified Plastic Injection Molding Products/Making – Zetar Detail:
1-Start from part design analysis
2-Mold design drawing and DFM report available so you can see how is the mold going to be before mold making
3-If product is complex,moldflow report will be present as well
4-In house mold making shop ensure you mold quality under well control.
5-Normally it takes 20-40 days to make mold,precise time depends on part design
Zetar Industry Co.,Limited from Shanghai China.
Our company has In-house tooling shop- fully equipped 6000 square feet tool room,making sure your molds making in house,providing free mold routine maintenance,and also mold repair work if you need.
Meanwhile 90 ton – 1100 ton injection molding machines 20 sets,30000 square feet injection molding room including 250 square feet M7 class clean room.We can produce parts from 0.01pound to 13 pounds.
If you have any plastic related product need to make,please feel free to email me firstname.lastname@example.org
1. Are you a trading company or a manufacturer？
We are a manufacturer as you can see our workshop as above.
Product detail pictures:
Related Product Guide:
To paint or stain your trim? That’s the question | Inspired Living | Molding Design
PedalSnake Introduces Line of Pedal-to-Pedal Interconnect Cables| Premier Guitar | Molds For Injection Molding
We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for China Cheap price Plastic Injection Molds For Food Containers - ISO Qualified Plastic Injection Molding Products/Making – Zetar, The product will supply to all over the world, such as: Suriname , Melbourne , Russia , To keep the leading position in our industry, we never stop challenging the limitation in all aspects to create the ideal products. In his way, We can enrich our life style and promote a better living environment for the global community.
By Eudora from Montreal - 2016.09.29 11:19
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Elvira from Las Vegas - 2015.09.21 11:44