Hot New Products Plastic Table Mold - Professional Custom Plastic Injection Molding Plastic mold Manufacturer – Zetar
Hot New Products Plastic Table Mold - Professional Custom Plastic Injection Molding Plastic mold Manufacturer – Zetar Detail:
1-Start from part design analysis
2-Mold design drawing and DFM report available so you can see how is the mold going to be before mold making
3-If product is complex,moldflow report will be present as well
4-In house mold making shop ensure you mold quality under well control.
5-Normally it takes 20-40 days to make mold,precise time depends on part design
Zetar Industry Co.,Limited from Shanghai China.
Our company has In-house tooling shop- fully equipped 6000 square feet tool room,making sure your molds making in house,providing free mold routine maintenance,and also mold repair work if you need.
Meanwhile 90 ton – 1100 ton injection molding machines 20 sets,30000 square feet injection molding room including 250 square feet M7 class clean room.We can produce parts from 0.01pound to 13 pounds.
If you have any plastic related product need to make,please feel free to email me firstname.lastname@example.org
1. Are you a trading company or a manufacturer？
We are a manufacturer as you can see our workshop as above.
Product detail pictures:
Related Product Guide:
Modern Crown Molding and Baseboard Ideas, Because It’s 2017 | Custom Mold Design
Get Better Control of Your LSR Molding: Plastics Technology | Plastic Molding Factory
As for aggressive costs, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such high-quality at such rates we have been the lowest around for Hot New Products Plastic Table Mold - Professional Custom Plastic Injection Molding Plastic mold Manufacturer – Zetar, The product will supply to all over the world, such as: Toronto , Myanmar , Czech republic , All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
By Lena from Muscat - 2016.04.08 14:55
Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!
By May from Bolivia - 2015.02.12 14:52