Hot Selling for Injection Molding Parts - Cleaning Brush For Bed Bug Trap – Zetar
Hot Selling for Injection Molding Parts - Cleaning Brush For Bed Bug Trap – Zetar Detail:
Zetar Industry Co.,Limited Shanghai China
Our company has In-house tooling shop- fully equipped 6000 square feet tool room,making sure your molds making in house,providing free mold routine maintenance,and also mold repair work if you need.
Meanwhile 90 ton – 1100 ton injection molding machines 20 sets,30000 square feet injection molding room including 250 square feet M7 class clean room.We can produce parts from 0.01pound to 13 pounds.
A: Plastic injection molding and mass production for plastic parts.
2. Q: Which kind information need for quotation?
A: 1) Sample photo with size or 2D/3D design
2) Product material
3) The quantity
4) Runner type, cold or hot
5) Mould steel type, P20, 718, 2738, H13, S136, 2316, an so on.
3. Q: I have no 3D drawing, how should I start the new project?
A: You can supply us a sample or tell me your idea,we will help to finish the 3D drawing design.
4. Q: How long will be the injection mold finished?
A: Usually it will take about one month to finish the mold.
5. Q: How about the samples?
A: After mold finished, We will make some samples for you to check as soon as we finish the mold and then deliver the samples for you to check.
6. Q: How about the mould modify?
A: You can tell us your comment about the samples after you receive them.If there is any dimension different from the drawing,we will modify the mold for free in our side and then make the new samples.
7. Q: How about the proprietary rights of the plastic injection mold?
A: Customer paid the mould so it all belong to Customer.
Product detail pictures:
Related Product Guide:
Milacron to feature injection molding ‘firsts’ at Fakuma 2018 | Molds For Injection Molding
Incredible Concurrent Events At CHINAPLAS 2019 | Custom Mold Design
We've one of the most innovative manufacturing devices, experienced and qualified engineers and workers, recognized good quality handle systems and also a friendly experienced income team pre/after-sales support for Hot Selling for Injection Molding Parts - Cleaning Brush For Bed Bug Trap – Zetar, The product will supply to all over the world, such as: Lahore , Bangladesh , Austria , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Michelle from Nepal - 2015.09.21 11:44
In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
By Eric from Bhutan - 2016.06.29 18:55