OEM Manufacturer Plastic Mould Injection Design - Custom small silicone rubber moulding parts – Zetar
OEM Manufacturer Plastic Mould Injection Design - Custom small silicone rubber moulding parts – Zetar Detail:
1-Start from part design analysis
2-Mold design drawing and DFM report available so you can see how is the mold going to be before mold making
3-If product is complex,moldflow report will be present as well
4-In house mold making shop ensure you mold quality under well control.
5-Normally it takes 20-40 days to make mold,precise time depends on part design
Zetar Industry Co.,Limited from Shanghai China.
Our company has In-house tooling shop- fully equipped 6000 square feet tool room,making sure your molds making in house,providing free mold routine maintenance,and also mold repair work if you need.
Meanwhile 90 ton – 1100 ton injection molding machines 20 sets,30000 square feet injection molding room including 250 square feet M7 class clean room.We can produce parts from 0.01pound to 13 pounds.
If you have any plastic related product need to make,please feel free to email me firstname.lastname@example.org
1. Are you a trading company or a manufacturer？
We are a manufacturer as you can see our workshop as above.
Product detail pictures:
Related Product Guide:
Part 2: Back to Basics on Mold Venting : Plastics Technology | Molding Design
10 home design trends to watch for in 2019 | Molding Design
Bear "Customer 1st, Good quality first" in mind, we work closely with our prospects and supply them with efficient and professional services for OEM Manufacturer Plastic Mould Injection Design - Custom small silicone rubber moulding parts – Zetar, The product will supply to all over the world, such as: Toronto , Provence , Japan , Due to the stability of our items, timely supply and our sincere service, we are able to sell our merchandise not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.
By Erin from Thailand - 2015.11.04 10:32
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Pearl from Argentina - 2016.09.22 11:32